|
Synology E10M20-T1 M.2 SSD & 10GbE combo adapter card
Overview
Synology E10M20-T1 helps you boost I/O performance and network bandwidth simultaneously using just one PCIe expansion slot on your Synology NAS. Achieve Multi-Gig Ethernet transmission speeds of up to 10 Gbps. Accelerate random I/O performance with the dual M.2 2280/22110 NVMe SSD slots.
Hardware Specification : Synology E10M20-T1 M.2 SSD & 10GbE combo adapter card
Host Bus Interface : PCIe 3.0 x8
Bracket Height : Low Profile and Full Height
IEEE Specification Compliance
- IEEE 802.3x Flow Control
- IEEE 802.3u Fast Ethernet
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
- IEEE 802.3an 10Gbps Ethernet
Data Transfer Rates : 10 Gbps
Supported Features
- 9 KB Jumbo Frame
- TCP/UDP/IP Checksum Offloading
- Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
- TCP Segmentation Offload (TSO)
- Large Send Offload (LSO)
- Receive Side Scaling (RSS)
- Generic Receive Offload (GRO)
- Generic Segmentation Offload (GSO)
Storage
- Storage Interface : PCIe NVMe
- Supported Form Factor : 22110 / 2280
- Connector Type and Quantity : M-key, 2 Slots
Size (Height x Width x Depth) : 71.75 mm x 200.05 mm x 17.70 mm
Warranty : 5 Years
Hard drive not included
Synology E10M20-T1 M.2 SSD & 10GbE combo adapter card
|
