|
Synology E10G18-T1 Single-port 10GBASE-T/NBASE-T add-in card
Overview
Equipped with an RJ-45 connector and supports IEEE 802.3an/bz (10GBASE-T/NBASE-T) and 802.3x, E10G18-T1 helps you smoothly migrate to a 10GbE networking environment with your existing infrastructure. Supporting backward compatibility and auto-negotiation between 10Gbps, 5Gbps, 2.5Gbps, 1Gbps, and 100Mbps, E10G18-T1 is an economic solution to overcome the data transmission bottleneck for small businesses and home users.
Hardware Specification : Synology E10G18-T1 Single-port 10GBASE-T/NBASE-T add-in card
Host Bus Interface : PCIe 3.0 x4
Bracket Height : Low Profile and Full Height
IEEE Specification Compliance
- IEEE 802.3x Flow Control
- IEEE 802.3u Fast Ethernet
- IEEE 802.3ab Gigabit Ethernet
- IEEE 802.3bz 2.5Gbps / 5Gbps Ethernet
- IEEE 802.3an 10Gbps Ethernet
Data Transfer Rates : 10 Gbps
Supported Features
- 9 KB Jumbo Frame
- TCP/UDP/IP Checksum Offloading
- Auto-negotiation between 100Mb/s, 1Gb/s, 2.5Gb/s, 5Gb/s, and 10Gb/s
Size (Height x Width x Depth) : 68.1 mm x 86.0 mm x 13.6 mm
Warranty : 5 Years
Hard drive not included
Synology E10G18-T1 Single-port 10GBASE-T/NBASE-T add-in card
|
